Jcsg-Plus Screen Jena Bioscience

Individual Jena Bioscience Screen Condition, 100 ml (Classic, Basic, Membrane, Cryo, Kinase, PEG/Salt) Indicate screen and condition # when placing the order
M-CS-IND-100ML 100 ml
EUR 239
Description: Individual Jena Bioscience Screen Condition, 100 ml (Classic, Basic, Membrane, Cryo, Kinase, PEG/Salt) Indicate screen and condition # when placing the order

Human IgG antibody Laboratories manufactures the jcsg-plus screen jena bioscience reagents distributed by Genprice. The Jcsg-Plus Screen Jena Bioscience reagent is RUO (Research Use Only) to test human serum or cell culture lab samples. To purchase these products, for the MSDS, Data Sheet, protocol, storage conditions/temperature or for the concentration, please contact Jena Bioscience GmbH. Other Jcsg-Plus products are available in stock. Specificity: Jcsg-Plus Category: Screen Group: Jena Bioscience

Antibody Formulation Screen
96 solutions
EUR 1031
Description: Antibody Formulation Screen

JBS True Blue
300 µl
EUR 16
Description: JBS True Blue

Rheumatoid Factor screen IgG/IgM/IgA ELISA kit
96 wells
EUR 462
Description: ELISA kit for the detection of Rheumatoid Factor screen IgG/IgM/IgA in the research laboratory

SG1 Screen 10 mL ECO Screen
96 x 100 µl µl
EUR 666
Description: SG1 Screen 10 mL ECO Screen

SG1 Screen HT-96 ECO screen
96 x 10 ml ml
EUR 242
Description: SG1 Screen HT-96 ECO screen

Screen Quest™ 10X cell staining buffer with Phenol Red Plus™
10 Plates
EUR 109

Screen Quest™ 10X calcium assay buffer with Phenol Red Plus™
10 Plates
EUR 109

Jena Bioscience information

Screen Quest™ 10X cell staining buffer with Phenol Red Plus™
36300 10 Plates
EUR 109

Screen Quest™ 10X calcium assay buffer with Phenol Red Plus™
36301 10 Plates
EUR 109

SG1 Screen 10 mL ECO Screen
M-MD1-88-ECO 96 x 100 µl µl
EUR 666
Description: SG1 Screen 10 mL ECO Screen

SG1 Screen HT-96 ECO screen
M-MD1-89-ECO 96 x 10 ml ml
EUR 242
Description: SG1 Screen HT-96 ECO screen

Screen Questâ„¢ 10X cell staining buffer with Phenol Red Plusâ„¢
36300-10mL 10 mL
EUR 109
Description: Ready-to-use buffer that is optimized for fluorescence cell imaing.

Screen Questâ„¢ 10X calcium assay buffer with Phenol Red Plusâ„¢
36301-10mL 10 mL
EUR 109
Description: Ready-to-use buffer that is optimized for calcium assays.

IL-23R:IL-23A[Biotin] Inhibitor Screening Assay Kit
78014 96 rxns.
EUR 1130
Description: The IL-23RA:IL-23A[Biotin] Inhibitor Screening Assay Kit is designed for screening inhibitors of IL-23A:IL-23RA interaction. The key to this kit is the high sensitivity of detection of biotin-labeled IL-23A by streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, IL-23RA is coated on a 96-well plate. Next, IL-23A[Biotin] is incubated with IL-23RA on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce chemiluminescence, which can then be measured using a chemiluminescence reader.

Mouse CTLA4[Biotin]:B7-1 Inhibitor Screening Assay Kit
79515 96 rxns.
EUR 1235
Description: The Mouse CTLA4[biotin]:B7-1 Inhibitor Screening Assay Kit is designed for screening and profiling inhibitors of mouse CTLA4:B7-1 signaling. This kit comes in a convenient 96-well format, with biotin-labeled mouse CTLA4, purified mouse B7-1, streptavidin-labeled HRP, and assay buffer for 100 binding reactions. The key to this kit is the high sensitivity of detection of biotin-labeled mouse CTLA4 by streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, B7-1 is coated on a 96-well plate. Next, CTLA4[biotin] is incubated with B7-1 on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce chemiluminescence, which can be measured using a chemiluminescence reader.

IL-17RA:IL-17A[Biotin] Inhibitor Screening Assay Kit
79891 96 rxns.
EUR 1245
Description: The IL-17RA:IL-17A[Biotin] Inhibitor Screening Assay Kit is designed for screening inhibitors of IL-17A:IL-17RA interaction. The key to this kit is the high sensitivity of detection of biotin-labeled IL-17A by streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, IL-17RA is coated on a 96-well plate. Next, IL-17A[Biotin] is incubated with IL-17RA on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce chemiluminescence, which can then be measured using a chemiluminescence reader.

IL-17RA[Biotin]:IL-17A Inhibitor Screening Assay Kit
72060 96 rxns.
EUR 1245
Description: The IL-17RA[Biotin]:IL-17A Inhibitor Screening Assay Kit is designed for_x000D_screening inhibitors of IL-17A:IL-17RA interaction. The IL-17RA[Biotin]-IL-17A Binding Assay Kit_x000D_comes in a convenient 96-well format, with biotin-labeled IL-17RA, purified IL-17A, streptavidinlabeled_x000D_HRP, and assay buffer for 100 binding reactions. The key to this kit is the high_x000D_sensitivity of detection of biotin-labeled IL-17RA by streptavidin-HRP. Only a few simple steps_x000D_on a microtiter plate are required for the assay. First, IL-17A is coated on a 96-well plate. Next,_x000D_IL-17RA is incubated with IL-17A on the plate. Finally, the plate is treated with streptavidin-HRP_x000D_followed by addition of an HRP substrate to produce chemiluminescence, which can then be_x000D_measured using a chemiluminescence reader.

PD-1[Biotinylated]: PD-L1 Inhibitor Screening Assay Kit
79523 384 rxns.
EUR 1070
Description: Cell signaling through the PD-1 receptor upon binding the PD-L1 ligand attenuates immune responses and is exploited by both tumors and viruses. The PD-1[Biotinylated]: PD-L1 Inhibitor Screening Assay Kit is designed for screening and profiling inhibitors of this signaling. This kit comes in a convenient 384-well format with biotin-labeled PD-1, purified PD-L1, streptavidin-labeled HRP, and assay buffer for 400 binding reactions. The key to this kit is the high sensitivity of detection of biotin-labeled PD-1 by streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, PD-L1 is coated on a 384-well plate. Next, PD-1 is incubated with PD-L1 on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce chemiluminescence, which can then be measured using a chemiluminescence reader.

PD-1:PD-L1[Biotinylated] Inhibitor Screening Assay Kit
72003 96 rxns.
EUR 1235
Description: The PD-1:PD-L1[Biotinylated] Inhibitor Screening Assay Kit is designed for screening and profiling inhibitors of this signaling. The key to this kit is the high sensitivity of detection of biotin-labeled PD-L1 by streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, PD-1 is coated on a 96-well plate. Next, PD-L1 is incubated with PD-1 on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce chemiluminescence, which can then be measured using a chemiluminescence reader.

PD-1:PD-L2[Biotinylated] Inhibitor Screening Assay Kit
72004 96 rxns.
EUR 1095
Description: The PD-1:PD-L2[Biotinylated] Inhibitor Screening Assay Kit is designed for screening and profiling inhibitors of this signaling. The key to this kit is the high sensitivity of detection of biotin-labeled PD-L2 by streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, PD-1 is coated on a 96-well plate. Next, PD-L2 is incubated with PD-1 on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce chemiluminescence, which can then be measured using a chemiluminescence reader.

PD-1[Biotinylated]:PD-L1 Inhibitor Screening Assay Kit
72005 96 rxns.
EUR 840
Description: The PD-L1 Inhibitor Screening Assay Kit is designed for screening and profiling inhibitors of this signaling. The key to this kit is the high sensitivity of detection of biotin-labeled PD-1 by streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, PD-L1 is coated on a 96-well plate. Next, PD-1 is incubated with PD-L1 on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce chemiluminescence, which can then be measured using a chemiluminescence reader.

PD-1[Biotinylated]:PD-L2 Inhibitor Screening Assay Kit
72006 96 rxns.
EUR 1235
Description: The PD-L2 Inhibitor Screening Assay Kit is designed for screening and profiling inhibitors of this signaling. The key to this kit is the high sensitivity of detection of biotin-labeled PD-1 by streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, PD-L2 is coated on a 96-well plate. Next, PD-1 is incubated with PD-L2 on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce chemiluminescence, which can then be measured using a chemiluminescence reader.

CD28:B7-1[Biotinylated] Inhibitor Screening Assay Kit
72007 96 rxns.
EUR 1070
Description: The CD28:B7-1[Biotinylated] Inhibitor Screening Assay Kit is designed for screening and profiling inhibitors of CD28:B7-1 signaling. The key to this kit is the high sensitivity of detection of biotin-labeled B7-1 by streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, CD28 is coated on a 96-well plate. Next, B7-1 is incubated with CD28 on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce chemiluminescence, which can be measured using a chemiluminescence reader.

PD-L1:B7-1[Biotinylated] Inhibitor Screening Assay Kit
72026 96 rxns.
EUR 1215
Description: The PD-L1:B7-1[Biotinylated] Inhibitor Screening Assay Kit is designed for_x000D_screening and profiling inhibitors of the PD-L1:B7-1 interaction. The key to this kit is the high sensitivity of detection of_x000D_biotin-labeled B7-1 by streptavidin-HRP. Only a few simple steps on a microtiter plate are_x000D_required for the assay. First, PD-L1 is coated on a 96-well plate. Next, B7-1-biotin is incubated_x000D_with PD-L1 on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition_x000D_of an HRP substrate to produce chemiluminescence, which can then be measured using a_x000D_chemiluminescence reader.